DescriptionConcrete Sealer X-2IntroductionOur Concrete Sealer X-2 offers a higher concentration hardener and densifier compared to Concrete Sealer X-1. It triggers the same chemical reactions and shares equivalent physical properties, coverage rates, and application procedures.Concrete Sealer X-2 is expertly formulated to seal highly porous concrete or concrete blocks. It is particularly recommended for poured concrete that is over a decade old, or if signs of seepage or damage such as dusting and efflorescence are present. This sealer is ideal for outdoor concrete surfaces exposed to severe weather conditions. However, we advise against using this sealer for decorative, colored, stamped, or aggregate concrete without seeking prior consultation.Price Comparison chart of competitive Concrete Sealers.ApplicationConcrete Sealer X-2 leaves a natural finish after application. It is UV resistant, non-yellowing, breathable, and the surface remains slip-free. This sealer is paintable because it is not a repellent coating after curing, The sealer neutralizes the alkalis in the concrete preventing saponification of the paint. The sealer will adhere to adhesives and epoxy coatings after curing without any adverse effects after a mild etching.Concrete Sealer X-2 is an admixture for any cement-based product. The sealer increases the structural and compressive strength of concrete, plaster, stucco, gunite, and block to densify the substrate. The pores compress in the treated concrete making are significantly less porous. They are less permeable to water migration and less susceptible to cracks during curing. It also encapsulates and expels excess alkali, lime, and other contaminants from the concrete. The recommended application rate is 14 oz per cubic yard of concrete.For optimal results, the surface must be free from water, oil, and dust to allow the sealer to penetrate effectively. A simple water absorption test can determine the concrete’s readiness for sealing. Check the surface of your concrete to make sure it absorbs drops of water within 20-30 seconds. If it does not (beads up) then use Eco Concrete Etcher before applying this sealer. If the surface passes the test, it’s ready for application. The sealer covers approximately 200 to 400 square feet per gallon, depending on the concrete’s porosity, and it is advisable to apply two coats. The recommended time interval between coats is 2 to 4 hours, with a curing period of 24 to 48 hours free from rain.FeaturesConcrete Sealer X-2 is environmentally friendly. It is non-toxic and non-flammable because it does not contain chemical solvents or release any VOC or noxious fumes. It is a ready-to-use DIY-type sealer with a product shelf life of at least two years. This concrete sealer is also guaranteed to last for the life of your concrete.ShippingWe offer a variety of shipping options based on the container size. Our quart (3 pounds) and gallon (9 pounds) containers ship via priority mail, while 5-gallon (2 x 2.5) Packages (49 pounds) ship using UPS ground. Larger orders such as 30-gallon (298 pounds) and 55-gallon drums (531 pounds) ship via common carrier. For free shipping, the drums must be delivered to a commercial location with a loading dock or picked up at the carrier’s terminal. Residential delivery with a lift gate can be arranged for an additional charge if needed. Please contact us for further details.1 Gallon of Concrete Sealer X-2 Additional Information:Why do I need to seal my concrete?Finally, The Concrete Network is an excellent resource for more information. It provides information on products, contractors, photographs as well as ideas and training.Order a Sample of this Product
