Description METHOD OF APPLICATION: – Read entire label before using. – TEST A SMALL AREA, according to application instruction to determine desired results. Use only on dry surfaces. Surfaces must be clean and grease-free. Apply RUST BUSTERS GEL on the rust stains, making sure the spots and stains are entirely covered. Discolouration will occur. Iron rust, for example, will turn purple colour. Let the product settle for approximately 5-10 minutes. Remove and rinse with water thoroughly. To avoid discoloration, always ensure to thoroughly rinse the treated surface with plenty of water before it dry. After settling, wipe the treated area with a clean cloth. Repeat the procedure till rust spots are totally removed. If Purple coloration occurs in stone, Use Floor Medics Booster & Additives to remove. LIMITATIONS: Do not allow product to come in contact with any non-recommended surface. Do not mix this product with other solutions, particularly acids, oxidizers, or different brands. For more information, kindly upload Technical Bulletin
