Description COVERAGE: Usage May Vary The amount of product required can vary based on the number of stains present. We recommend testing a small area first to determine the appropriate quantity for optimal results METHOD OF APPLICATION FOR DEEP SET STAIN: Equipment Required: Bowl, household gloves, plastic putty knife, and sponge. Prepare the Surface: Start by sweeping or vacuuming the surface to remove any loose debris. Mix the Paste: In a bowl, combine several tablespoons of Floor Medics BOOSTER with ADDITIVES, mixing thoroughly to create a thick, pliable paste. Let the Paste Set: Allow the mixture to sit for 30 minutes or longer to ensure proper consistency. Apply the Paste: Using a plastic putty knife, apply a 5 to 8 mm thick layer of paste directly over the stain, extending at least 3 cm beyond the edge of the stain for complete coverage. Let It Stand: Leave the paste on the stain for 24 to 48 hours, or until it hardens completely. Remove the Paste: Carefully remove the hardened paste with a plastic putty knife, being cautious not to scratch the surface. Wash off any residue with Floor Medics Stone Cleaner and a sponge. Repeat if Necessary: If the stain persists, repeat the procedure. If the area darkens from absorbed moisture, it should dry completely within 1 to 2 days. General Guidelines: This recommendation serves as a general guideline for the removal of deep-set stains from porous tile, natural stone, and masonry. Actual requirements may vary based on the type of tile, method of application, and the extent of the stains. LIMITATIONS: Do not allow product to come in contact with any non-recommended surface. For more information, kindly upload Technical Bulletin
