Sikafloor 132 Rapid Self Levelling Compound extended informationEnvironmentalCreated with a low cement formulation, using supplementary cementing materials for a more environmentally friendly option.StandardsSikafloor 132 Rapid Self Levelling conforms to the requirements of EN13813 CT-C35-F7.UsesSikafloor 132 Level Rapid is not designed as a final wearing surface and must be covered with a floor covering.Not to be used on flexible or unstable substrates.Do not use over vinyl coverings, insulation/building boards, anhydrite screeds etc.Not suitable for use over large areas of internal timber floors.Do not use on floors with rising damp.Do not use as a DPM.Porous substrates must be sealed to prevent pin holing and cracking.Never exceed water quantity stated.Do not add any other materials to the mix.Do not use externally (for internal use only).Do not use for embedding underfloor heating systems.Suitable for use with underfloor heating applications beneath heating systems, with maximum surface temperature of 27 0C.For substrate or technical advice please contact 08081 410 715Sikafloor 132 Rapid Self Levelling Compound Application InstructionsConcrete/screed should be at least 28 days old.The surface must be dry, clean, structurally sound and possess an effective damp proof membrane.The surface should be free from residual adhesives, oil, grease, wax, loose flaky paint, dust, laitance etc. that could reduce adhesion.Mix Sikafloor 132 Level Rapid with water as directed and apply to the primed sub floor.Always add Sikafloor 132 Level Rapid to water, not the other way around.Ensure floor temperature is ≥5 °C.Switch off underfloor heating at least 48 hours before, and for 48 hours after, application.Sikafloor 132 Rapid Self Levelling Compound product informationPackaging16 kg BagShelf Life6 Months.Storage ConditionsMaterial should be stored under cover, off the ground and in dry condi- tions (between 5 °C and 35 °C). Use of this product after the end of the declared storage period may increase the risk of allergic reaction.Appearance / ColourGrey Powder.Densityca 2.0 kg/L (fresh mortar)Technical informationCompressive Strength35 N/mm2 (after 28 days / 20 °C EN13892-2)Flexural Strength7 N/mm2 (after 28 days / 20 °C EN13892-2)Sikafloor 132 Rapid Self Levelling Compound application informationYield16 kg powder covers approx. 3 m2 at a depth of 3 mm. 1.79 kg powder / m2 / mm.Layer Thickness2 mm to 10 mm.Ambient Air Temperature 5 °C to 25 °C.Relative Air Humidity75 % max.Mixing Ratio2.6 to 2.8 litres of water required per 16 kg bag.Substrate Temperature 5 °C to 25 °C.Pot Life5-10 mins approx. after mixing at 20 °C.Setting time30 mins for foot traffic (3 mm thickness at 20 °C).Waiting Time / OvercoatingLoose lay flooring from 45 mins. (3 mm thickness at 20 °C).Bonded floor coverings from 3 hours. (3 mm thickness at 20 °C). NOTE: Values are approximate, thickness and temperature may affect properties. When overcoating Sikafloor®-132 Level Rapid always ensure the moisture content has achieved the required value for the coating product, as the waiting time will vary with the application thickness and ambient humidity (refer to the product data sheet of the over/ top coat product). Categories: All Products, Floor Levelling Compounds - Pallet Deals
