Description Anti-Slip Additives #50 Suspending Filler are used to provide slip resistance with floor coatings in residential, commercial and industrial areas. They can be used for stair cases, ramps, elevators, commercial kitchens, wet areas, passageways, walkways, showers, machine shops, locker rooms, automobile maintenance shops, pools, garages, hangars, cold storage rooms, warehouse floors, factories and many more environments. Directions For Use 2-Pack System: 1-5% by volume per mixed litre, depending on the anti-slip required, coating film thickness and application methods. (e.g. 1% is equivalent to 10ml/L). Use a mechanical mixer to ensure thorough mixing. Add #50 into Part A only whole mixing, pour slowly in portions until fully dispersed and let sit for 10-15 minutes for the particles to expand. Add Part B after, thoroughly mix and apply product. Directions For Use Single Pack System: 1-5% by volume per mixed litre, depending on the anti-slip required, coating film thickness and application methods. (e.g. 1% is equivalent to 10ml/L). Use a mechanical mixer to ensure through mixing. Add #50 into single pack product while mixing, pour slowly in portions in portions until fully dispersed and let sit for 10-15 minutes for the particles to expand. After standing time, thoroughly mix and apply product. Application: Stir into the coating system prior to the process of application. Coverage: 1 – 5% by volume per mixed litre, depending on the anti-slip required, coating film thickness, and application methods. Dry Times: Depending on the epoxy or coating system used. Clean Up: Clean all left over material with a broom or vacuum cleaner. Size: 200g.
