Concrete Sealer X-3 is also available in custom colors.

DescriptionColored Concrete Sealer X-3 is a water-based special blend of polysiloxanes/silanes that crosslink below the surface of the concrete. This makes the concrete surface water and stain repellent, allowing the removal of spills more easily. Application of the sealer is either alone or on top of Concrete Sealer X-1 or Concrete Sealer X-2. This will provide double protection of the concrete with both deep sealing and a repellent finish.This sealer is available in 20 different UV-stable colors as shown below. They are extremely easy to apply and quick drying. This makes them very versatile when compared to other concrete staining systems. You can apply these sealers either as an individual color or you can combine them. They can provide a multitude of different hues, shades, mottled, and faux natural stone effects. For testing purposes, you can either order 4-ounce spray bottle samples or a full set of all 20 colors.Colored Concrete Sealer X-3 is for all types of decorative and stained concrete pavers, concrete aggregate driveways and concrete walkways, bricks, clay tiles, mortar, grout, and any natural stones. Use this sealer for above-grade plaster and stucco to provide a breathable barrier against water, stains, and acids.It is also used in dog kennels and agricultural institutions to provide stain resistance, which assists in the maintenance of these enclosures. This concrete sealer leaves an invisible or natural finish (no sheen) after application, and the surface will not be slippery.Colored Concrete Sealer X-3 has also been proven as an effective anti-graffiti barrier. It prevents paints, aerosols, and crayons from adhering to the wall and allows easy removal if they do.This sealer is a ready-to-use sealer and does not require the addition of an activator. This means that it does not have a limited pot life, unlike some competitive sealers, and it has a shelf life of at least 6 months.It can be used to change the color of any type of surface. For example, it was used by one of our customers in a patio project to achieve this effect.  Application of Colored Concrete Sealer X-3Colored Concrete Sealer X-3 is easy to apply using a brush, medium nap roller, or low-pressure sprayer at any temperature between 40-80°F. Before treatment, the surface does not need any special treatment, but it must be water, oil, and dust-free to allow proper penetration of the sealer. Check the surface of your concrete before applying this sealer to make sure it absorbs drops of water within 20-30 seconds. If it beads up, then use Eco Concrete Etcher before applying this sealer. The coverage rate is approximately 200 to 400 sf/gal/app, depending on the concrete porosity. Apply two coats 2 to 4 hours apart rather than one thick coat. Allow to cure for 24 to 48 hours without rain.Color Chart of twenty colored concrete sealers (click on this image to enlarge)More Information:Comparison of Concrete Dyes with Concrete Stains.Blog article from concretenetwork.comCheck out our customer reviews on Google or Trustpilot, or our Testimonial pageOrder a Sample of this Product