DescriptionThe PowerDyne Bearing Hand Tool makes changing your bearings super simple – much easier than the screwdriver trick! The bearing shaped flange ensures that the pressure is evenly dispersed so you don’t have to worry about damaged covers when pushing in or removing your bearings!For use with 8mm bearings onlyNote: This tool is not recommended for aluminum hubs (such as the Halo wheels)Instructions for installing your bearing:Unscrew your wheel from your plate (if already mounted to your plate).Remove your existing bearing (see below)Put wheel on a secure, flat surface.Place bearing onto the flange with the shield/cover side down (as that needs to face the outside of your wheel once installed).Line up the bearing with the hub opening and press down firmly until the bearing is seated in the correct place.Repeat 8 times ��Instructions for removing your bearing:Unscrew your wheel from your plate (if already mounted to your plate).Remove any visible dirt or anything that will prevent the bearing from coming out of the wheelPlace the tool flat into the bearing.While firmly grasping the wheel, start to gently rock the bearing tool in small circular motions.Use caution when prying bearings out as they may go flying!Repeat 8 times ��
