DescriptionEco Paint & Sealer Stripper is biodegradable, non-flammable, VOC compliant in all 50 states, and an environmentally friendly coating remover. The stripper does not contain any methylene chloride, caustics, or toxic chemicals. It does not contain any carcinogens or deplete the ozone like some competitive products.Eco Paint & Sealer Stripper is highly effective in removing the most durable industrial coatings. Use to remove tough acrylics, epoxies, urethanes, polyureas, varnish, latex paints, lead-based paints, alkyd paints, and oil-based enamels. Furthermore, use it on all types of substrates including concrete, masonry, brick, wood, steel, aluminum, and metal alloys.This stripper is not harmful like methylene chloride-based strippers., It is not sticky or messy like soy-based strippers. Therefore, it offers significant cost savings over labor-intensive mechanical stripping methods.Eco Paint & Sealer Stripper is a ready-to-use product. Mix with a drill mixer until it is a creamy consistency (approx one min/gal). Apply with a roller, brush, or airless sprayer at 50-90 F. Apply the product at twice the thickness of the coating that you are trying to remove. It must not dry out during the stripping process so covered with a plastic sheet if needed. The coating is normally stripped in 2 to 4 hours but it can be significantly longer (up to 36 hours) for coatings with multiple layers. After stripping, remove the coating using a scraper, squeegee, shop-vac, or a >3000 psi pressure washer.The coverage rate will vary depending on the substrate and coating thickness but 50 to 100 sf/gal is typical.Check out our customer reviews on Google or Trustpilot or our Testimonial pageOrder a Sample of this Product
