TILES RESTORER (1KG)

Description METHOD OF APPLICATION:  – Read entire label before using. – TEST A SMALL AREA, according to application instructions, to determine desired results. EQUIPMENT: 175 to 300 RPM floor machine or hand polish machine. Synthetic fiber white or red floor pads. Floor Medics Tiles Restorer & Stone. Cleaner. Protective plastics & tapes. Wet-dry vac.  Mop and bucket. Squeegee. Procedure: Sweep or vacuum surface. Remove or stripped the surface of existing sealers or coatings. Protect baseboards, carpet, etc. with protective plastic or tape. Wet an area no larger than 20 sq. ft. with clean water and place 2 tablespoons of Stone Restorer in the center. Using a synthetic fiber white or red floor pad, work the area in a side-to-side motion with a 175 to 300 RPM floor machine. The consistency of the slurry should be fluid enough to achieve even coverage. If the slurry becomes too dry, add water as required. For large areas, work in small sections and be sure to overlap the sections to achieve an even polish. Continue until the required polish has been achieved – squeegee slurry from a small area to check for desired results prior to removing slurry. Use a wet-dry vacuum to remove the slurry and rinse thoroughly with Floor Medics Stone Cleaner. Polish dry with a new polishing pad or cotton bonnet. PRODUCT OF SINGAPORE