Kerakoll Setaflex Standard Set Tile Adhesive GREY / WHITE S1

Kerakoll Setaflex Standard Set Tile AdhesiveCoverage:Grey (mixing ratio of 23%) – approx 1.2kg/m2White (mixing ratio of 23%) – approx 1.2kg/m2Intended useSubstrates:existing tileswaterproofing productsheating systemscement-based screedsconcrete substratesplasterboardfibro-cement slabsgypsum and anhydritebrick/blockworklime and cement-based plasters/renders – thermal insulation panelling systemsinsulating panelsimpact noise insulation sheetstimber – metal – PVCMaterials:porcelain tileslow thickness slabsceramic tileslarge sizenatural stonerecomposed materialsglass mosaicsthermal and acoustic insulation – terracotta – klinkerUses:adhesivefloors and wallsfor internal and external useoverlayingterraces and balconiesswimming pools and fountains – saunas and spadomesticcommercialindustrialstreet furniturePreparation of the substrateSubstrates must comply with BS 5385, parts 1-5, be level, cured, undamaged, compact, rigid, dry and free from any debonding agents. It is good practice to dampen highly absorbent concrete substrates or apply a coat of Primer A Eco. Anhydrite substrates must have a residual humidity ≤ 0,5 CM-%. Cement-based screeds must have a residual humidity ≤ 2 CM-%. Anchored substrates must comply with BS 8204 and anhydrite with underfloor heating must have a residual humidity ≤ 0,3 CM-%.PreparationMixing water (EN 12004-26): Grey ≈ 22% – 23% by weight White ≈ 22% – 23% by weight Mixing water on-site: Grey ≈ 4.4 – 4.6 l/1 bag White ≈ 4.4 – 4.6 l/1 bag The amount of water to be added, indicated on the packaging, is an approximate guide. It is possible to obtain mixtures with consistency of variable thixotropy according to the application to be made.ApplicationTo guarantee structural adhesion it is necessary to apply a layer of adhesive sufficient to cover the entire back of the coating material.Large, rectangular sizes with sides > 60 cm and low thickness sheets may require adhesive to be applied directly to the back of the material.Check samples to make sure the adhesive has been transferred to the back of the material.Create elastic expansion joints: – ≈ 10 m2 in external applications (approx. 3×3 m) – ≈ 40 m2 in internal applications (8×5 m) withunderfloor heating – ≈ 100 m2 in internal applications (10×10 m)without underfloor heating – every 8 metres in long, narrow applications. Respect all structural, fractionising and perimeter joints present in the substrates.NotesPre-treatment of special substrates Timber (internal use only): Keragrip Eco Metal (internal use only): Keragrip Eco Gypsum and anhydrite (internal use only): Kerakoll Primer A EcoPVC (internal use only): Keragrip Eco As treating special substrates is difficult to classify in a standard manner, it is always advisable to contact Kerakoll Global Service and/or request a site inspection by a GreenBuilding Consultant. In any case it is essential to carefully read the technical data sheet on how to use the indicated primers properly.Materials and special substrates Natural stones and recomposed materials: materials that are known to be subject to deformation or staining due to water absorption require a quick-setting or reactive adhesive.Natural stone in general may have characteristics that vary even with reference to materials of the same chemical and physical nature. For this reason it is essential you consult Kerakoll Global Service to request specific indications or to carry out a test on a sample of the material.In the absence of specific indications from the manufacturer, natural stone slabs with reinforcement layers, in the form of resin coating, polymer mesh, matting, etc. or treatments (for example damp courses, etc.) applied on the laying surface must be tested in advance to ensure they are compatible with the adhesive. Check for the presence of any really consistent traces of rock dust created during cutting, and remove them if found. Waterproofing products: adherent and floating polymer sheets, liquid bitumen and tar-based sheets or membranes require application of a laying screed on top. In the case of reactive waterproofing products (such as RM waterproofing according to EN 14891) it is necessary to use a reactive adhesive.NBProduct for professional useabide by any standards and national regulationsdo not use the adhesive to correct substrate irregularities greater than 12 mmprotect from direct rainfall for at least 24 hrs the temperature, ventilation and absorption of the substrate and covering materials, may vary the adhesive workability and setting timesuse the right size of notched trowel for the format of the tile or slabguarantee a full-bed in all external laying operationsif necessary, ask for the safety data sheet for any other issues, contact the Kerakoll Worldwide Global ServiceKerakoll Setaflex Standard Set Tile Adhesive technical dataShelf life≈ 12 months from production in the original sealed packaging, protect from humidityPack20 kgAdhesive thicknessfrom 2 to 12 mmTemperature of the air, substrates and materialsfrom 5 °C to 35 °CPot life at 23 °C- grey≈ 3 - 4 hrs- white≈ 3 - 4 hrsOpen time at 23 °C (BIII tile):- grey≥ 60 min. (EN 12004-2)- white≥ 60 min.Foot traffic/grouting of joints at 23 °C (BIa tile):- grey≈ 24 hrs- white≈ 24 hrsGrouting in walls at 23 °C (BIa tile)- grey≈ 24 hrs- white≈ 24 hrsReady for use at 23 °C/ 5 °C (BIa tile)- foot traffic≈ 1 day- heavy traffic≈ 3 - 5 days- swimming pools ( 23 °C)≈ 7 daysCoverage per mm thickness:- grey (mixing ratio 23%)≈ 1.2 kg/m2- white (mixing ratio 23%)≈ 1.2 kg/m2Kerakoll Setaflex Standard Set Tile Adhesive performanceVOC Indoor Air Quality (IAQ) - Volatile organic compound emissionsConformityEC 1 Plus GEV-EmicodeGEV certified 17636/11.01.02HIGH-TECHShear adhesion (porcelain tiles/ porcelain tiles) after 28 days≥ 2.5 N/mm2ANSI A-118.4Tensile adhesion (concrete/porcelain tiles) after 28 days≥ 2.5 N/mm2EN 12004-2Durability test:- adhesion after heat ageing≥ 1 N/mm2EN 12004-2- adhesion after water immersion≥ 1 N/mm2EN 12004-2≥ 1 N/mm2EN 12004-2Vertical slipEN 12004-2Transversal deformation≥ 2.5 mmEN 12004-2Working temperaturefrom -40oC to 90oC Categories: All Products, S1 Tile Adhesives - Pallet Deals, Tile Adhesives - Pallet Deals