$33.27
$62.21
ATLAS GEOFLEX EXPRESS C2FT extended informationConsumption:Tile size [cm]Place of applicationRecommended trowel tooth size [mm]Consumptio n rate [kg/m2 ]2 x 2wall flooring4 41,3 1,310 x 10wall flooring4 61,3 2,015 x 60wall flooring6 82,0 2,520 x 25wall flooring6 82,0 2,525 x 40wall flooring6 82,0 2,530 x 30wall flooring6 82,0 2,530 x 60wall flooring8 102,5 3,040 x 40wall flooring8 102,5 3,050 x 50wall flooring8 102,5 3,060 x 50wall flooring10 123,0 3,570 x 70wall flooring10 123,0 3,5tiles of the type board*, e.g. 20 x 90 or 15 x 100wall flooring8 102,5 3,0Unique Gel TechnologyATLAS GEOFLEX EXPRESS adhesive formulation uses the innovative technology of silicate gel in combination with fast-setting cement. This makes it possible to obtain: – very rapid pre-setting, eliminating the possibility of building salts building up under the tiles and in their structure,– rapid increases in adhesion and strength.Silicate gel has a unique ability to bind water. Accumulation of a part of the mixing water ensures complete cement hydration, regardless of the type of the tiles. Thanks to appropriate water management, which is necessary to complete the setting process, the gel adhesive ensures full adhesion to substrates of various absorbency levels.The use of silicate gel technology in combination with fast-setting cement offers the following benefits:can be grouted after just 2 hours for rapid repair work,the possibility of bonding any type of cladding, both absorbent and non-absorbent,it is possible to optimally adapt the consistency of the adhesive to the individual preferences of the contractor and the needs of the application specific application, by dosing water over a much wider range than with traditional adhesives,achieving a full spread of adhesive under the panels, which improves the adhesion and durability of the fixing, especially in external applications,safe bonding of coverings on substrates exposed to direct sunlight (as long as the temperature does not exceed the permissible value), both during the tiling work and during the setting of the adhesive mortar.PropertiesATLAS GEOFLEX EXPRESS is manufactured as a dry mix of top quality cement binder, aggregates and special natural and synthetic modifiers.Rapid setting – use of rapid setting cement in the adhesive formula allows for rapid increase of adhesion and strength, especially during the initial setting (first 2-3 hours after tiles installation). This ability enables to foot traffic and grouting just after 2 hours after tiles installation. The adhesive is recommended also for quick repairs of the floor (e.g. on balcony, terrace etc.)The wide range of adhesive layer thicknesses (2-15 mm) allows:– thin-coat cladding installation on even substrates, – thin-coat cladding installation on uneven substrates, preceded by substrate floating, – thick-coat cladding installation on uneven substrates, with no need for substrate floatingNo cladding slip – enables installation of the cladding from top to bottom with no need of support at the fixing stage.No shrinkage of the adhesive underneath the tile – no subsidence of the tiles during setting – works can be continued after a break with no risk of level difference.Resistant to changing atmospheric conditions – allows for quick and safe works in various atmospheric conditions. Rapid strength gain by the adhesive limits possibility of damaging cladding during installation outside of the building.ATLAS GEOFLEX EXPRESS – cladding typeglazed tiles terracotta porcelain tiles laminated tilesuse ATLAS ULTRA GEOFLEXnatural stone cladding (granite, marble, travertine, syenite, slate, etc.).perform an application test*clinker stoneware ceramic mosaic glass mosaicperform an application test*glass, coloured, printed tiles, etc.perform an application test* and check the recommendations of the tile manufacturer concrete / cement mortar tiles composite panelsuse ATLAS ULTRA GEOFLEXinsulation and soundproofing panelsuse ATLAS ULTRA GEOFLEXFormats of installed elementssmall, medium and large format tiles: ≤ 0.50 m2 and with the length of the larger side ≤ 100 cm 0.50 m2)Use ATLAS ULTRA GEOFLEXslim type tilesUse ATLAS ULTRA GEOFLEXTypes of Objectresidential buildingsresidential buildings public, educational, office and healthcare buildings commercial and service construction religious buildings industrial buildings and multi- storey garagesuse ATLAS ULTRA GEOFLEX industrial warehousesuse ATLAS ULTRA GEOFLEX traffic constructionuse ATLAS ULTRA GEOFLEX SPA facilitiesuse ATLAS ULTRA GEOFLEXPlace of installation low-traffic areas medium traffic areas high traffic areas kitchen, bathroom, laundry room, garage (in individual housing) terraces balconies, loggias external slab stairs external post stairs, e.g. cantilever stairsuse ATLAS ULTRA GEOFLEX traffic routes facades (including on thermal insulation systems)use ATLAS ULTRA GEOFLEXcladding of building plinths process tanks, swimming pools, fountains, jacuzzis, balneotechnology (without aggressive chemicals)use ATLAS ULTRA GEOFLEX drinking water tanksuse ATLAS PLUSsaunasuse ATLAS ULTRA GEOFLEXshowers, washing facilities, rooms washed with large quantities of water Substrate type – standardcement floors and screeds anhydrite screeds cement and cement-lime plasters gypsum plasters cellular concrete brick or silicate block walls brick or hollow brick walls gypsum block masonry Substrate type – difficultconcrete terrazzo mineral, dispersion and reactive sealing coatings plasterboard drywall screeds (cement or anhydrite) with water or electrical underfloor heating, screeds with heating mat embedded in the adhesive screeds with heating mat embedded in the adhesive plaster with wall heating gypsum boards gypsum fibre boards cement fibre boards existing ceramic or stone cladding (tile on tile)only insideresin varnishes for concrete bound to the substrate dispersive, oil painting coats, bonded with substrate 25mm)use ATLAS ULTRA GEOFLEXwood-based flooring panels , minimum 22 mm thick, fixed with ATLAS M-System fasteners 25mm) 18mm) metal and steel surfacesuse ATLAS ULTRA GEOFLEXplastic surfacesuse ATLAS ULTRA GEOFLEXATLAS GEOFLEX EXPRESS – technical requirementsReaction to fireA1/A1flBond strength defined as: • Initial bonding • Early bonding≥ 1.0 N/mm2 ≥ 0.5 N/mm2Bond durability in conditioning/thermal ageing conditions defined as: bonding after thermal ageing≥ 1.0 N/mm2Bond durability in water/damp conditions defined as: bonding after immersion in water≥ 1.0 N/mm2Bond durability in freeze-thaw cycles conditions defined as: bonding after freeze- thaw cycles≥ 1.0 N/mm2ATLAS GEOFLEX EXPRESS technical dataBulk densityapprox. 1.4 g/cm3Mixing ratio (water/dry mix)0.24 ÷ 0.30 l / 1 kg 6.0 ÷ 7.5 l / 25 kgMin/max. adhesive thickness2 mm ÷ 15 mmTemperature of the adhesive preparation and of the substrate and surroundings during the workfrom 5 °C to 35 °CMaturation time5 minutesService life (stand-by time)*approx. 45 minutes (mixing ratio 0.24 l/kg approx. 75 minutes (mixing ratio 0.3 l/kgOpen time*min. 20 minutesAdjustability*10 minutesWalking on the floor/jointing*after 2 hoursPedestrian traffic load**after 2-6 hoursFull operational loads - wheeled traffic**after approx. 24 hoursStarting underfloor heating**after 7 datsSubstrate PreparationThe substrate should be: stable – sufficiently load-bearing, resistant to deformation, free of substances that reduce adhesion and seasoned. even – the maximum thickness of the adhesive is 15 mm, for levelling substrates with larger irregularities, e.g. ATLAS ZW 330 levelling mortar, ATLAS SMS, SAM or POSTAR underlays can be used. cleaned – from layers that may impair adhesion of the adhesive, in particular from dust, dirt, lime, oil, grease, wax, oil and emulsion paint residues. Substrate covered with algae, mould fungi etc., should be cleaned and protected with ATLAS MYKOS NR 1 or ATLAS MYKOS PLUS, primed – ATLAS UNI-GRUNT or ATLAS UNI-GRUNT ULTRA – when the substrate has excessive or non-uniform absorptivity, – ATLAS GRUNTO-PLAST – when the substrate has low absorption or is covered with layers limiting adhesion, – ATLAS ULTRAGRUNT – when tiles will be fixed on critical substrates. damp proofed – when laying tiles on surfaces that are exposed to water Categories: C2FT Tile Adhesives - Pallet Deals and Bulk Buy, Tile Adhesives - Pallet Deals
Top Products For Builders
